Color Space
PDFs must be submitted in the CMYK color space.
WGprinters cannot maintain accurate color with both CMYK and RGB color spaces included in a file.
Spot Colors
Spot colors should be named with the correct Pantone color code.
Example: Pantone 295 c
Images
Images must be:
• Embedded at final size
• Minimum resolution of 100ppi at the final size
Fonts
▎Digital Rigid Printing
Minimum type size of 10pt for positive type and 14pt for reverse type
▎Vinyl Roll & Sticker Printing
Minimum type size of 5pt for positive type and 7pt for reverse type
▎Large Format Banners
Minimum type size of 10pt for positive type and 14pt for reverse type
Line Widths
▎Digital Rigid Printing
Minimum of 0.5pt for positive line widths and 1pt for reverse line widths
▎Vinyl Roll & Sticker Printing
Minimum of 0.5pt for positive line widths and 0.5pt for reverse line widths
▎Large Format Banners
Minimum of 0.5pt for positive line widths and 1pt for reverse line widths
Bleed
▎Auto-Generated Bleed
Bleed will be auto-generated for artwork that touches the edge of the sheet for all products. Do not include in file.
▎If File Already Has Bleed
If uploading a file with bleed, you’ll need to crop or skew the image in the uploader and will be prompted to do so.
If possible, we recommend re-uploading the file without bleed.
Contour Cuts
• For contour cuts on substrates thicker than 1/8” (.125), all inside cuts will require 3/8” or 0.375 radius.
• No contour cuts apply to 10mm Coroplast.
• WGprinters reserves the right to simplify overly complex contour cut paths to maximize the quality of the final product.
• Proofs are required to be sent for approval for altered cut paths at no additional cost.
• Borders at the edge of double-sided signs must be 3/8” or thicker not including bleed.